Fully automatic air purification equipment

The fully automatic air purification equipment adopts a three-stage purification process: raw air source - three-stage filter - refrigerated dryer - condenser separator - post stage filter - pressure swing adsorption drying system - precision filter - process point use

The pressure swing adsorption drying system is based on the principle of pressure swing adsorption, which means that the desiccant absorbs moisture from the air under a certain pressure and decomposes the adsorbed moisture under normal pressure. Thus achieving the purpose of compressed air drying. Adopting a dual configuration, two drying towers work alternately and continuously, with periodic automatic switching.

This device runs according to a self written program, and a selection control button is added to the operation panel to autonomously select the regeneration cycle, eliminating resource waste. All data is collected on the control touch screen, and sound and light warnings can be issued for abnormal pressure and temperature, prompting inspection. The PLC outputs 485 protocol and can be remotely controlled through connection.

Install a pneumatic valve at the inlet of the cooling water, which automatically opens when regeneration begins, with a regeneration water consumption of less than 0.3m3/h.