Fully automatic hydrogen nitrogen gas distribution equipment

Equipment advantages:

1. Select high-precision quality flow controllers to visually display the flow rate of each ratio during the proportioning process

·The quality flow controller has the following advantages:

·Instantly start without preheating, control corresponding time ≤ 2ms (typical)

·Fluid control accuracy ± (0.5% Rdg+0.2% F.S)

·Conduct proportioning tests with the minimum ratio during trial operation, resulting in lower gas loss.

·During the proportioning process, fine tuning of the mass flow meter can be done in the control room to achieve higher accuracy.

2. Using upper computer communication control to visually display specific parameters during the proportioning process.

·Using a quality flow meter as the on-site control device, the real-time flow rate of the proportioning can be directly viewed on site.

·Operate remotely from the control room through communication with the quality flow meter, with no loss of accuracy.

·The control operation adopts one click start and pre saves the required proportioning ratio.

3. Sampling analysis adopts on-site measurement and remote signal transmission.

·The analytical instrument adopts a two-stage composition, which displays the proportioning faster and more accurately.

·The analytical instrument adopts advanced single light source, single tube half chamber, high stability and reliability micro acoustic thin film detector and new thermoelectric detector. The biggest feature of this product is high stability (long-term stable operation of the instrument, small zero drift), high reliability (solid detector) and high selectivity.